[ad_1]
What you will study
- Learn how to set up an SSD right into a Atomos Grasp Caddy II
- Learn how to format an SSD to be used in an Atomos
What you will want
- Atomos Ninja V
- 2.5-inch SSD
- iFix device Equipment or comparable
- Atomos Grasp Caddy II
Some of the widespread questions that I get requested in regards to the Atomos Ninja V is in regards to the storage media; what must you use, and when you’ve determined, how do you get it prepared to be used.
The simplest reply is to purchase one of many Anglebird SSDs; these are off the shelf options and solely require a fast format to make them prepared to be used.
They’re additionally extraordinarily strong as a consequence of their metallic construct, however to be sincere, they’re extraordinarily costly, and in the event you’re utilizing your Atomos Ninja V and also you’re on a funds, there’s a far cheaper resolution.
Within the field with the Atomos Ninja V is a 2.5-inch SSD caddy. That is designed to carry an ordinary 2.5-inch SSD just like the Lexar NQ100, and it takes only a few moments to suit.
As soon as put in, you have to pop alongside to the Media choices inside the Atomos Ninja V menu and format it to the proper ExFat format.
It’s value doing this within the Atomos Ninja V moderately than in your desktop, because it appears to get a greater consequence. The method is straightforward, however there are a few pointers which might be properly value contemplating.
Firstly a small pot of Loctite 243, a small dab on the screw threads earlier than inserting them will make all of the distinction to the drive’s use, primarily stopping the screws from coming free. Don’t go for the excessive energy 638, as you’ll by no means be capable of undo them.
The second tip is to get an honest set of mini screwdrivers. You possibly can faff round with an affordable set however for this and lots of different initiatives, go for the iFix package. The package is nice worth and can make an actual distinction to your life.
Time wanted: 10 minutes.
Learn how to set up and SSD into the Atomos Grasp Caddy II
- Set up label up
Set up the two.5-inch SSD into the ATOMOS caddy, guaranteeing that the SATA connector is within the right place. This could see the label of the drive going through up.
- Tighten the screws
Place the highest of the caddy over the SSD and align the screw holes. Utilizing a small Philips screwdriver, screw within the 4 small screws till hand tight.
- Format the SSD
Now insert the drive into the Atomos Ninja. Boot the Ninja after which faucet the settings choices. Faucet Media after which Format and OK, and also you’re now prepared to make use of the drive as Atomos storage media.
The entire course of ought to take you not more than ten minutes to finish if that. Any questions or feedback, please depart them within the field under.
[ad_2]
Source link
